sell flexo printing machine

Basic work principle:The materials to printed enter the printing units with upper-middle-lower allocations through the printing ink to the Anilox roller will be transferred to the printing roller.Then the ink transmission will be well done between the printing roller and the press-roller.Finally the printed products will be finished through the rewinding unit.

Function characteristics:1.Main motor adopts imported frequency stepless speed regulator.

2.Unwinding,traction and rewinding are controlled by magnetic powder arrester,cluth and tension inspector. Tension controller is automatic type.

3.Machine adopts ceramic veins roller, which is characterized by wearable,rust-resistant and long using life,etc.It can improve the printing efficiency.

4.Printing unit can be adjusted 360°,each veins roller can print independently,without effecting others when leave it alone.

5.Each printing unit collocated with IR dryer,the UV dryer is optional.

6.The ink roller can break away automatically when machine stops,and it still run in a low speed avoid the ink dry or asymmetric.

7.Unwinding and rewinding shaft adopt air shaft,it's convenient to change load and unload the material.

8.From material-feeding,printing,drying, glazing,laminating,molding,die-cutting,rewinding to waste-collecting can be done in the same machine,the machine is known for machine characteristics such as wide printing range,environmental ink,fast printing speed,convenient operation,high economic benefit and so on.It's the best choice for note,paperboard and label printing factories.

*Jiangnan reserve the right to change technical characteristics without previous advice.